|
|
|
|
 |
 |
Classical Guitar Making: A Modern Approach to Traditional Design
You have found Classical Guitar Making: A Modern Approach to Traditional Design
one of the thousands of books about antiques
at Antique Book Store. We hope that by offering you a tremendous selection of the
books about antiques that you want at incredible prices, you will be back the next time you need anything from Antique Book Store.
We greatly appreciate your patronage and look forward to
servicing you again.
|
|
|
 |
|
|
You Are Here: Books About Antiques > Antique Decorating > Item 68 of 304
|
|
|
 |
|
| List Price: |
|
$29.95 |
|
| Our Price: |
|
$19.77
|
|
| Customer Rating: |
|
|
Available from Amazon
Price Last Updated : 7-30-2008
|
|
|
|
|
|
|
|
Features
Hardcover: 320 pages
Publisher: Sterling November 28, 2006
Language: English
ISBN-10: 1402720602
ISBN-13: 978-1402720604
Product Dimensions:
11 x 8.6 x 1.4 inches
Shipping Weight: 3.4 pounds
Product Description
What a thrill for any musician: playing a fine-sounding instrument that he or she has lovingly crafted from scratch. With this richly illustrated manual, well-known luthier and guitarist John Bogdanovich shows exactly how to build that first, beautiful guitar, using traditional, time-tested methods. All that’s required are basic woodworking techniques and a minimally equipped shop. Bogdanovich discusses the anatomy of the guitar, sound, choosing an instrument, selecting woods, templates and molds, and preparation. In more than 300 pages of text, he painstakingly lays out the details of construction, from assembling the neck and sides to installing the fingerboard and bridge.
Reader Reviews
The author starts the budding luthier with the construction of molds and jigs. The order in which this is presented is excellent: by the time you get to the construction of the solera, you should be quite proficient at cutting the outline of the guitar in MDF (medium density fiberboard) with a 14" band saw. My solera turned out very well. A note on materials: John notes that the material for the molds will require two 4' x 8' sheets of 3/4" MDF and 1/2 of a 4' x 8' sheet of 1/2" MDF. 4' x 8' sheets of MDF are VERY HEAVY and impossible to work with in a small shop. I purchased 2' x 4' sheets instead and the results were great. Also, a 2' x 4' sheet 5/8" thick should be substituted for one of the 3/4" sheets, for the lining bender jig. This will save a bit of planing. One should note the typo on page 51: under "Cutting the Pieces," "10 inches wide and 20 inches long" should be "10 inches wide and 24 inches long." On page 58 where John specifies "six pieces 24 1/2 inches x 10 1/2 inches," pieces only 24" x 10 1/2" will do very well. The plan for the caul on page 123 is missing. The author says it was accidentally cut out of the book, and he wrote, "The laminations are masonite thinned down to about .090 to make them easier to bend. I use about four of them. The outer one has sixteen pieces of 3/4 MDF glued from top to bottom along the length as shown on page 123. The pieces that go over rounded areas must be shaped to fit flat on their entire surface." The author will offer printed plans for the guitar at some point in the future. Overall a very nice book. I've just finished bending the sides according to John's instructions and I look forward to the next steps in this very interesting project.
Comment | Permalink |
(Report this)
Back To Top
|
Classical Guitar Making: A Modern Approach to Traditional Design
by John S. Bogdanovich
List Price: $29.95
Available from Amazon
Price: $19.77
on 7-30-2008
|
 |
 |
|
|
|
|
|
|
|
|
